Bamboo-for-PlasticINDUSTRIAL DIGITAL PLATFORM
中文
◎Home ▤News ✦Q&A ▦Compare ❖Glossary ▣Data ◫Scenarios ☰About ❖ Knowledge baseFive modulesEnter →
Five Systems ↗
Enter Platform
Home/Industry Q&A/Certification & Compliance
CERTIFICATION & COMPLIANCE

What exactly are the PPWR PFAS limits, and do bamboo products fall under them?

SHORT ANSWER

From 12 August 2026, food-contact packaging placed on the EU market must not contain any individual PFAS above 25 ppb, the sum of PFAS above 250 ppb, or polymeric PFAS above 50 ppm. A bamboo-fibre container with a fluorinated grease barrier is covered by these limits; a fluorine-free barrier is therefore the substitution focus, and any change of barrier requires fresh food-contact and compostability testing.

PFAS are used in packaging mainly for grease and liquid resistance: fast-food wrappers, baking paper, the barrier layer inside a moulded fibre container. Their shared problem is persistence — they are called forever chemicals for a reason — which is why PPWR addresses them separately from the general recyclability requirements.

The limits sit at three levels and use different analytical methods: 25 ppb for an individual PFAS by targeted analysis, 250 ppb for the sum, and 50 ppm where PFAS are polymeric. Separately, if total fluorine in the packaging exceeds 50 mg F/kg, the supplier must demonstrate on request whether that fluorine originates from PFAS or from non-PFAS sources.

The practical impact depends entirely on the barrier system. A pure bamboo-fibre article with a water-based, fluorine-free grease barrier can stay outside the restriction, but its grease resistance and heat tolerance are usually below fluorinated systems, so it has to be validated against the real serving temperature and fat content. Swapping the barrier is a formulation change: food-contact compliance and compostability must be re-tested, and the previous report cannot be carried over.

KEY DATES AND FIGURES
Applies from2026-08-12
Individual PFAS≤ 25 ppb
Sum of PFAS≤ 250 ppb
Polymeric PFAS≤ 50 ppm
Total fluorine trigger> 50 mg F/kg requires source evidence
SOURCES