The EU has no filing system. Framework Regulation (EC) 1935/2004 plus GMP Regulation (EC) 2023/2006 are the general requirements, and plastics fall under (EU) No 10/2011. Bamboo-fibre articles mostly sit in the non-harmonised area, so you document against the destination member state's rules plus migration testing. In the US you work through FDA: paper and board under 21 CFR 176.170 / 176.180, and any additive either listed or covered by an FCN.
The EU principle to internalise is that the enforcing member state sets the standard for non-harmonised categories — paper, bamboo, wood, coatings. The same shipment can be compliant in Germany and asked for more paperwork in Italy. Confirm the destination country; “EU compliant” is not a single regime.
The evidence pack is normally four items: a composition statement including additives, coatings and inks; overall and specific migration testing with simulants chosen by food type and contact conditions; a Declaration of Compliance under Article 16 of 1935/2004; and traceability records. Buyers read the DoC first.
The US works differently. A food-contact substance is either listed in 21 CFR, covered by a Food Contact Notification, or supported by a no-objection letter. Bamboo fibre has no dedicated entry, so in practice you argue the paper and board provisions with extraction data, backed by confidential composition statements from upstream suppliers.
The shared failure mode is changing material without retesting. Resin, adhesive, coating or ink — any change can move migration and void the report. Poor change control is the most common finding in export audits, and the fastest way to lose a customer's confidence.
| EU framework | (EC) 1935/2004 on food contact materials and articles |
|---|---|
| EU GMP | (EC) 2023/2006 on good manufacturing practice |
| EU plastics | (EU) No 10/2011 authorised substances and migration limits |
| Declaration | DoC required under Article 16 of 1935/2004 |
| US paper and board | 21 CFR 176.170 (aqueous and fatty food) / 176.180 (dry food) |