Four groups: compostability to EN 13432 or an equivalent standard; food-contact compliance under Framework Regulation (EC) 1935/2004 plus member-state implementing rules; PPWR requirements on recyclability and PFAS; and feedstock certification such as FSC where a sourcing claim is made. The applicable combination depends on the product category and its intended use, so the list has to be built per article, not per supplier.
Classify by use before listing certificates. Single-use items that contact food directly need food-contact compliance plus compostability. Packaging and bags that do not contact food need compostability or recyclability plus the PFAS limits. Durable goods — furniture, board, construction components — follow a different path entirely: physical performance, formaldehyde emission and structural standards. One certificate cannot cover all three paths.
A common error is treating “compostable” as a master key. A compostability certificate describes end-of-life behaviour. It does not establish food-contact safety, and it does not discharge the PPWR recyclability requirement. The reverse is also true: a recyclability mark says nothing about compostability. Each mark covers one segment of the chain and cannot substitute for another.
Sequence the work certification-first. Confirm that the material can obtain a certificate before committing to a tool, because a material-grade certificate and a finished-product certificate cover different scopes. If the material is not settled and moulds are cut anyway, changing material later invalidates the whole test set. The purchase order should state explicitly which scope the supplier's certificate covers.